POLISHING POWDER
Polishing powder suitable for the final polishing of marble surfaces, marble / cement agglomerate and limestone. It allows to polish the surface quickly, reducing the risk of “burns”.
USAGE
Pour the powder on the surface and wet it with water until you get a paste.
Using a single-brush machine equipped with a white or natural fiber disc, pull the dough and spread it over the surface.
If necessary, add powder or water to the mixture.
After polishing, remove the residue with a wet vacuum cleaner.
Do not let the mixture dry on the floor as it could damage the marble.
We recommend working 2-3 square meters at a time.
If necessary, repeat the operation.
At the end clean the surface with a good neutral detergent (DETERTWINS).
During use, be careful not to dirty any surface other than the surface to be polished with LUX POWDER.
COVERAGE
about 45-55 SQM / KG
WARNINGS
Irritating. Avoid contact with eyes and skin.
In case of contact, wash immediately with plenty of water. Wear a mask and rubber gloves during use. Keep out of reach of children.
If swallowed consult a doctor and show the label
